Crest Audio CPL 25C+ 운영 매뉴얼 - 페이지 7

{카테고리_이름} Crest Audio CPL 25C+에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Crest Audio CPL 25C+ 18 페이지. Passive 2-way coaxial loudspeaker system

RIGGING & MOUNTING

Grouping of insert sets for CPL 25C +

Group A

A set of four M6 inserts on the rear, designed to be used with the Peavey Versamount 35 mounting ceiling and

wall-mount bracket. These are spaced apart side-to-side on the centers by 76 mm, and apart 108 mm

top-to-bottom on the centers, and the group of four is located centered on the rear side-to-side, and closer to the

bottom.

Group B

The M8 inserts at the center of the U-Bracket mounting plates on the top and bottom, normally used for the

U-Bracket retention, but can be used for safety chain/wire rope if necessary.

Group C

The M6 insert at the center of the rear of the cabinet is for use with a safety chain when using the other Groups A

or B, using the proper eyebolt.

NEVER use just one insert to fly a cabinet! Insert C can use just one for safety wire/chain attachment, as long as

there are at least two other inserts on a given cabinet used for primary suspension points.

For Group A, always use all four inserts of a given group as a set; NEVER use just one insert to fly a cabinet! The

four insert groupings are meant to have all four inserts used at once within group A.

For Group B, always use both inserts with the appropriate hardware to mount a model specific Crest Audio

U-Bracket. These inserts can also be used, if necessary, as safety points for a chain or rope attachment point when

other mounting methods are being used.