Cisco 9134 - MDS Multilayer Fabric Switch 구성 매뉴얼 - 페이지 31

{카테고리_이름} Cisco 9134 - MDS Multilayer Fabric Switch에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 9134 - MDS Multilayer Fabric Switch 49 페이지. Mds 9000 series
Cisco 9134 - MDS Multilayer Fabric Switch에 대해서도 마찬가지입니다: 사양 (3 페이지), 릴리스 노트 (48 페이지), 릴리스 노트 (44 페이지), 릴리스 노트 (22 페이지), 릴리스 노트 (3 페이지), 릴리스 노트 (40 페이지), 릴리스 정보 (10 페이지), 매뉴얼 (16 페이지), 하드웨어 설치 매뉴얼 (36 페이지)

페이지 인쇄
Cisco 9134 - MDS Multilayer Fabric Switch 구성 매뉴얼
•
All non-HP multi-pathing products except for Microsoft MPIO for Windows
Installing the Microsoft iSCSI Initiator
The IP host uses its NICs and the Microsoft iSCSI Initiator to enable iSCSI. The Microsoft iSCSI Initiator is
configured with the GbE address of each iSCSI interface that the host will access.

Setup

Uninstall any installed version of the Microsoft Initiator before installing the current version. Download
the iSCSI Initiator and User's Guide (uguide.doc) from the Microsoft web site (search for "iSCSI"
at www.microsoft.com) and follow the installation instructions. See
initiator" on page 16" for more information.
In the Software Update Installation Wizard, at the Installation Options screen
MPIO Multipathing Support for iSCSI. By default this value is disabled.
Figure 24 Enabling multi-pathing support for iSCSI
A Microsoft iSCSI Initiator icon is placed on the server desktop and in the control panel. See the
Microsoft user guide for more information.

Enabling iSCSI on the C-Series switch

To enable the iSCSI feature, you must explicitly enable iSCSI on all switches connected to the iSCSI
Initiators. By default, this feature is disabled on all C-Series switches.
In the example, the subnets of the switches match the static IPs assigned to the two NICs in the blade
server. One switch has an IP address of 20.20.20.1 for its GigE port, and the other switch has an IP
address of 20.20.21.1 for its GigE port.
"Install the Microsoft iSCSI
(Figure
24), select Microsoft
C-Series iSCSI
31