Cisco 9134 - MDS Multilayer Fabric Switch Manual de configuração - Página 31

Procurar online ou descarregar pdf Manual de configuração para Interruptor Cisco 9134 - MDS Multilayer Fabric Switch. Cisco 9134 - MDS Multilayer Fabric Switch 49 páginas. Mds 9000 series
Também para Cisco 9134 - MDS Multilayer Fabric Switch: Especificações (3 páginas), Nota de lançamento (48 páginas), Nota de lançamento (44 páginas), Nota de lançamento (22 páginas), Nota de lançamento (3 páginas), Nota de lançamento (40 páginas), Notas de lançamento (10 páginas), Manual (16 páginas), Manual de instalação do hardware (36 páginas)

Imprimir página
Cisco 9134 - MDS Multilayer Fabric Switch Manual de configuração
•
All non-HP multi-pathing products except for Microsoft MPIO for Windows
Installing the Microsoft iSCSI Initiator
The IP host uses its NICs and the Microsoft iSCSI Initiator to enable iSCSI. The Microsoft iSCSI Initiator is
configured with the GbE address of each iSCSI interface that the host will access.

Setup

Uninstall any installed version of the Microsoft Initiator before installing the current version. Download
the iSCSI Initiator and User's Guide (uguide.doc) from the Microsoft web site (search for "iSCSI"
at www.microsoft.com) and follow the installation instructions. See
initiator" on page 16" for more information.
In the Software Update Installation Wizard, at the Installation Options screen
MPIO Multipathing Support for iSCSI. By default this value is disabled.
Figure 24 Enabling multi-pathing support for iSCSI
A Microsoft iSCSI Initiator icon is placed on the server desktop and in the control panel. See the
Microsoft user guide for more information.

Enabling iSCSI on the C-Series switch

To enable the iSCSI feature, you must explicitly enable iSCSI on all switches connected to the iSCSI
Initiators. By default, this feature is disabled on all C-Series switches.
In the example, the subnets of the switches match the static IPs assigned to the two NICs in the blade
server. One switch has an IP address of 20.20.20.1 for its GigE port, and the other switch has an IP
address of 20.20.21.1 for its GigE port.
"Install the Microsoft iSCSI
(Figure
24), select Microsoft
C-Series iSCSI
31