Cisco 9134 - MDS Multilayer Fabric Switch 릴리스 정보 - 페이지 4

{카테고리_이름} Cisco 9134 - MDS Multilayer Fabric Switch에 대한 릴리스 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 9134 - MDS Multilayer Fabric Switch 10 페이지. Mds 9000 series
Cisco 9134 - MDS Multilayer Fabric Switch에 대해서도 마찬가지입니다: 사양 (3 페이지), 구성 매뉴얼 (49 페이지), 릴리스 노트 (48 페이지), 릴리스 노트 (44 페이지), 릴리스 노트 (22 페이지), 릴리스 노트 (3 페이지), 릴리스 노트 (40 페이지), 매뉴얼 (16 페이지), 하드웨어 설치 매뉴얼 (36 페이지)

페이지 인쇄
Cisco 9134 - MDS Multilayer Fabric Switch 릴리스 정보

Product Features

The Cisco MDS 9134 32-port Multilayer Fabric Switch provides up to 32 4-Gbps
Fibre Channel ports and two 10-Gbps Fibre Channel ports in a one rack unit (1RU)
chassis. A port activation license allows you to add an extra eight ports to the
original 24-port configuration for a total of 32 4-Gbps ports. Another port activation
license will allow you to activate the two 10-Gbps Fibre Channel ports for a total of
34 active ports.
The Cisco MDS 9134 switch can be used as a stand-alone switch or stacked together
via copper X2 transceivers for up to 64 4-Gbps ports.
Note – Optical X2 transceivers can also be used to stack the Cisco MDS 9134
switches together.
The part numbers for the optical and copper X2 transceivers are as follows:
Cisco 10 Gbps Fiber Channel-short wavelength X2 SFP: SG-XSWCS-10G-X2S-Z
■
Cisco 10 Gbps Fiber Channel-long wavelength X2 SFP: SG-XSWCS-10G-X2L-Z
■

Supported Software

This section describes the firmware and operating system requirements for the Cisco
MDS 9134 switch.

Firmware Requirements

The Cisco MDS 9134 Hardware requires SAN OS rev 3.2(1a) (minimum) which is
delivered as patch 126488-03 and available from SunSolve
Installing the Firmware" on page 6

Operating System Requirements

The following operating systems running on hosts on the SAN are compatible with
the Cisco MDS 9134 switch:
2
Cisco MDS 9134 Multilayer Fabric Switch Hardware Release Notes • November 2007
for more information.
SM
. See
"Downloading and