Cisco 9134 - MDS Multilayer Fabric Switch Informacje o wersji - Strona 4

Przeglądaj online lub pobierz pdf Informacje o wersji dla Przełącznik Cisco 9134 - MDS Multilayer Fabric Switch. Cisco 9134 - MDS Multilayer Fabric Switch 10 stron. Mds 9000 series
Również dla Cisco 9134 - MDS Multilayer Fabric Switch: Specyfikacje (3 strony), Podręcznik konfiguracji (49 strony), Uwaga dotycząca wydania (48 strony), Uwaga dotycząca wydania (44 strony), Uwaga dotycząca wydania (22 strony), Uwaga dotycząca wydania (3 strony), Uwaga dotycząca wydania (40 strony), Podręcznik (16 strony), Instrukcja instalacji sprzętu (36 strony)

Product Features

The Cisco MDS 9134 32-port Multilayer Fabric Switch provides up to 32 4-Gbps

Fibre Channel ports and two 10-Gbps Fibre Channel ports in a one rack unit (1RU)

chassis. A port activation license allows you to add an extra eight ports to the

original 24-port configuration for a total of 32 4-Gbps ports. Another port activation

license will allow you to activate the two 10-Gbps Fibre Channel ports for a total of

34 active ports.

The Cisco MDS 9134 switch can be used as a stand-alone switch or stacked together

via copper X2 transceivers for up to 64 4-Gbps ports.

Note – Optical X2 transceivers can also be used to stack the Cisco MDS 9134

switches together.

The part numbers for the optical and copper X2 transceivers are as follows:

Cisco 10 Gbps Fiber Channel-short wavelength X2 SFP: SG-XSWCS-10G-X2S-Z

■

Cisco 10 Gbps Fiber Channel-long wavelength X2 SFP: SG-XSWCS-10G-X2L-Z

■

This section describes the firmware and operating system requirements for the Cisco

MDS 9134 switch.

The Cisco MDS 9134 Hardware requires SAN OS rev 3.2(1a) (minimum) which is

delivered as patch 126488-03 and available from SunSolve

Installing the Firmware" on page 6

The following operating systems running on hosts on the SAN are compatible with

the Cisco MDS 9134 switch:

Cisco MDS 9134 Multilayer Fabric Switch Hardware Release Notes • November 2007

for more information.

. See

"Downloading and