Cisco ASR 900 Series 구성 매뉴얼 - 페이지 9

{카테고리_이름} Cisco ASR 900 Series에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR 900 Series 19 페이지. Configuring 1g traffic on 8-port 10 gigabit ethernet interface module
Cisco ASR 900 Series에 대해서도 마찬가지입니다: 구성 매뉴얼 (13 페이지), 구성 매뉴얼 (6 페이지), 구성 매뉴얼 (6 페이지)

페이지 인쇄

Command or Action

Example:

Device> enable

Step 2

configure terminal

Example:

Device# configure terminal

Step 3

interface type number [name-tag]

Example:

Device(config)# interface Gigabitethernet

1/0/1

Step 4

cdp enable

Example:

Device(config-if)# cdp enable

Step 5

end

Example:

Device(config-if)# end

Setting the Transmission Timer and Hold Time

Perform this task to set the frequency of Cisco Discovery Protocol transmissions and the hold time for Cisco Discovery Protocol

packets.

Procedure

Command or Action

Step 1

enable

Example:

Device> enable

Purpose

• Enter your password if prompted.

Enters global configuration mode.

Configures the specified interface and places the CLI in interface

configuration mode.

If the encapsulation of an interface is changed, Cisco

Note

Discovery Protocol is reenabled on that interface, even

if Cisco Discovery Protocol was previously disabled.

Enables Cisco Discovery Protocol on the interface.

Returns the CLI to privileged EXEC mode.

Purpose

Enables privileged EXEC mode.

• Enter your password if prompted.