Cisco ASR 920 series 매뉴얼 - 페이지 5

{카테고리_이름} Cisco ASR 920 series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR 920 series 36 페이지. Aggregation services router
Cisco ASR 920 series에 대해서도 마찬가지입니다: 설치 매뉴얼 (36 페이지), 시작하기 (6 페이지), 설치 매뉴얼 (42 페이지), 하드웨어 설치 매뉴얼 (46 페이지)

페이지 인쇄

Installing the Cisco ASR 920 Series Router

Step 2

Position one of the brackets against the chassis side, and align the screw holes.

Step 3

Secure the bracket to the chassis with the screws removed when performing Step 1 . The recommended maximum torque

is 10 in.-lb.

Step 4

Repeat Step 2 and Step 3 for the other bracket.

Installing the Router Chassis in the Rack

Note

Ensure adequate air flow when mounting the router in a rack. For more information, see the "Air Flow

Guidelines" section on page 11 .

Note

Install the cable guides before installing the router in a 19-inch EIA rack. See

To install the router chassis in the equipment rack, perform these steps:

Installing the Router Chassis in the Rack

Attaching the Cable

Installing the Cisco ASR 920 Series Router

Guides.