Cisco ASR 920 series 매뉴얼 - 페이지 7

{카테고리_이름} Cisco ASR 920 series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco ASR 920 series 36 페이지. Aggregation services router
Cisco ASR 920 series에 대해서도 마찬가지입니다: 설치 매뉴얼 (36 페이지), 시작하기 (6 페이지), 설치 매뉴얼 (42 페이지), 하드웨어 설치 매뉴얼 (46 페이지)

페이지 인쇄

Installing the Cisco ASR 920 Series Router

Note

If the chassis is mounted using 19-inch brackets, you must assemble the cable guides before installing the

chassis on the rack.

To install the cable guides, perform these steps:

SUMMARY STEPS

1. Position the cable guide-left and cable guide-right against the front of the chassis and align the four screw

holes, as shown in the fgure below.

2. Secure the cable guides with the four M6x12mm screws supplied with the cable kit. The recommended

maximum torque is 3N-m.

DETAILED STEPS

Step 1

Position the cable guide-left and cable guide-right against the front of the chassis and align the four screw holes, as shown

in the fgure below.

Figure 6: Cable Guide Installation For 19-inch Rack Brackets

Attaching the Cable Guides

Installing the Cisco ASR 920 Series Router