- ページ 7

スイッチ Cisco ASR 920 seriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco ASR 920 series 36 ページ。 Aggregation services router
Cisco ASR 920 series にも：設置マニュアル (36 ページ), はじめに (6 ページ), 設置マニュアル (42 ページ), ハードウェア・インストール・マニュアル (46 ページ)

Installing the Cisco ASR 920 Series Router

Note

If the chassis is mounted using 19-inch brackets, you must assemble the cable guides before installing the

chassis on the rack.

To install the cable guides, perform these steps:

SUMMARY STEPS

1. Position the cable guide-left and cable guide-right against the front of the chassis and align the four screw

holes, as shown in the fgure below.

2. Secure the cable guides with the four M6x12mm screws supplied with the cable kit. The recommended

maximum torque is 3N-m.

DETAILED STEPS

Step 1

Position the cable guide-left and cable guide-right against the front of the chassis and align the four screw holes, as shown

in the fgure below.

Figure 6: Cable Guide Installation For 19-inch Rack Brackets

Attaching the Cable Guides

Installing the Cisco ASR 920 Series Router