BYOC Confidence Booster 사용 설명서 - 페이지 4

{카테고리_이름} BYOC Confidence Booster에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. BYOC Confidence Booster 19 페이지.

Parts Checklist for the Confidence Booster Kit

Resistors

1% metal film has a light blue body and 5 bands. 5% carbon film has a light brown body and 4

bands. Your kit may come with one or both types.

1 - 360 Ohm

or 390 Ohm

1 - 10k

1 - 100k

1 - 1M

2 - 2M2

Capacitors:

3 - 100n/.1uF Film cap - These may be green or red in color. The code on the body may

consist of various alphanumeric characters, but in the center of the code will be the

numbers "104". So for example, your cap may read '2p104k'. The characters refer to

model and tolerance. The inner '104' is the important code that tells you the capacitor

value is 0.1 microfarads

1 - 100uF Aluminum Electrolytic Your kit may actually come with anything from 1uf -

220uf. The aluminum electrolytic capacitor will be shaped like a can. It will have one

lead that is longer. This is the positive lead. The shorter lead is the negative lead and there

will also be a stripe or some sort of marking along the negative side.

Transistors:

1 - 2N5088 Your kit may actually come with a 2N3904, MPSA18, or any other NPN

silicon transistor with an EBC pinout.

Diodes:

1 - 1N4001 (Black with a silver stripe)

IC:

1 - 4558 or similar Dual Op-amp

Potentiometers:

1 - 100k Trimpot Your kit may come with anything from 10k - 500k.

Hardware:

1 - Confidence Booster PCB

2 - Enclosed Jacks

1 - Battery Snap

Hook-up wire

(Orange/Blue/Black/Black/Brown) or (Orange/Blue/Brown/Gold)

(Orange/White/Black/Black/Brown) or (Orange/White/Black/Gold)

(Brown/Black/Black/Red/Brown) or (Brown/Black/Orange/Gold)

(Brown/Black/Black/Orange/Brown) or (Brown/Black/Yellow/Gold)

(Brown/Black/Black/Yellow/Brown) or (Brown/Black/Green/Gold)

(Red/Red/Black/Yellow/Brown) or (Red/Red/Green/Gold)