Cisco Catalyst 2960-CX 매뉴얼 - 페이지 13

{카테고리_이름} Cisco Catalyst 2960-CX에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 2960-CX 24 페이지.
Cisco Catalyst 2960-CX에 대해서도 마찬가지입니다: 제품 개요 (15 페이지)

페이지 인쇄

Managing Switch Stacks

Procedure

Step 1

Step 2

Step 3

Command or Action

enable

Example:

Switch> enable

configure terminal

Example:

Switch# configure terminal

stack-mac persistent timer [0 | time-value]

Example:

Switch(config)# stack-mac persistent

timer 7

Enabling the Persistent MAC Address Feature

Purpose

Enables privileged EXEC mode.

• Enter your password if prompted.

Enters global configuration mode.

Enables a time delay after a stack-master change

before the stack MAC address changes to that

of the new stack master. If the previous stack

master rejoins the stack during this period, the

stack uses that MAC address as the stack MAC

address.

You can configure the time period as 0 to 60

minutes.

• Enter the command with no value to set

the default delay of approximately 4

minutes. We recommend that you always

enter a value.

If the command is entered without a value,

the time delay appears in the

running-config file with an explicit timer

value of 4 minutes.

• Enter 0 to continue using the MAC address

of the current stack master indefinitely.

The stack MAC address of the previous

stack master is used until you enter the no

stack-mac persistent timer command,

which immediately changes the stack

MAC address to that of the current stack

master.

• Enter a time-value from 1 to 60 minutes

to configure the time period before the

stack MAC address changes to the new

stack master.

The stack MAC address of the previous

stack master is used until the configured

time period expires or until you enter the

no stack-mac persistent timer command.

Managing Switch Stacks