Cisco Catalyst 2960-L 설치 매뉴얼 - 페이지 11
{카테고리_이름} Cisco Catalyst 2960-L에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 2960-L 22 페이지.
Cisco Catalyst 2960-L에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (20 페이지)
페이지 인쇄
Switch Installation
Mounting on a Wall
For the best support of the switch and cables, make sure that the switch is attached securely to wall studs or
to a firmly attached plywood-mounting backboard. Mount the switch with the front panel facing down.
Warning
Read the wall-mounting instructions carefully before beginning installation. Failure to use the correct hardware
or to follow the correct procedures could result in a hazardous situation to people and damage to the system.
Statement 378
Caution
Following safety regulations, wall-mount the switch with its front panel facing down.
Figure 6: Mounting on a Wall
1
When you complete the switch installation, see
switch configuration.
Installing the Switch on a Table or Shelf
SUMMARY STEPS
1. To install the switch on a table or shelf, locate the adhesive strip with the rubber feet in the mounting-kit
envelope.
2. Attach the four rubber feet to the four circular etches on the bottom of the chassis.
User-supplied screws (for example, you can use # 6
wood screws with a washer head 1-inch long).
After Switch Installation, on page 12
Mounting on a Wall
for information on
Switch Installation
11