FIBARO FGBHDW-002 운영 매뉴얼 - 페이지 4

{카테고리_이름} FIBARO FGBHDW-002에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. FIBARO FGBHDW-002 7 페이지. Door / window sensor contact & temperature sensor
FIBARO FGBHDW-002에 대해서도 마찬가지입니다: 운영 매뉴얼 (13 페이지), 빠른 시작 매뉴얼 (9 페이지)

페이지 인쇄

#4: Physical installation

To install the Door/Window Sensor:

1. Peel off the protective layer from the sticker on the accessory.

2. Stick the accessory onto the door/window frame.

3. Peel off the protective layer from the sticker on the magnet.

4. Stick the magnet onto the moving part of the door/window, no

further than 5mm from the sensor.

Positioning of the Sensor and the magnet:

Correct positioning of the magnet in relation to the Sensor:

(vertical line marks should align)

PHYSiCaL inStaLLation

max. 5 mm

#5: Reset

Resetting the Door/Window Sensor to factory defaults:

Reset procedure allows to restore the accessory back to its factory

settings including HomeKit pairing.

1. open the cover.

2. Press the button 3 times then press and hold the button.

Button

3. wait for the LeD indicator to glow.

4. Release the button.

5. Click the button to confirm.

6. accessory will glow blue for 1.5 seconds to confirm reset.

7. Delete the accessory from the app before pairing it again.

ReSet