FIBARO FGBHMS-001 운영 매뉴얼 - 페이지 3

{카테고리_이름} FIBARO FGBHMS-001에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. FIBARO FGBHMS-001 7 페이지. Motion sensor. motion, light & temperature sensor
FIBARO FGBHMS-001에 대해서도 마찬가지입니다: 운영 매뉴얼 (14 페이지), 빠른 매뉴얼 (18 페이지)

페이지 인쇄

#2: Powering the accessory

1. turn the cover counter-clockwise and open it.

2. Remove the battery blocker and check if the battery is placed cor-

NOTE

rectly.

Remember

use

only

battery

type

specified in the man-

ual and keep the right

polarity.

NOTE

if the accessory blinks

green after powering,

it is already paired and

3. the accessory will glow red – it is ready to be paired.

has to be reset to pair

4. Close the cover and turn it clockwise, dots on the casing should

again.

align.

PoweRinG tHe aCCeSSoRY

#3: Pairing the accessory

1. open the Settings app on your ioS device.

2. Go to the Bluetooth® section, and turn the Bluetooth® on.

3. Place the accessory next to your ioS device.

4. open a HomeKit compatible app of your choosing on your ioS

device.

5. open pairing window in your HomeKit app to detect available

accessories.

6. Choose Motion Sensor you wish to pair.

7. You can identify it - Motion Sensor will triple blink blue 3 times.

8. Find HomeKit Setup Code on the last page of Quick Start Guide

included in the box that looks like this:

XXX-XX-XXX

9. Start pairing with your HomeKit app.

10. Point your ioS device's camera at the Setup Code to scan it or en-

ter the Setup Code manually.

11. if entered Setup Code is valid, the device will complete the setup

process.

12. Follow instructions displayed in the application.

NOTE

Remember to keep

your HomeKit Setup

Code in safe place. You

may need it in case of

re-pairing.

PaiRinG tHe aCCeSSoRY