FIBARO FGBHMS-001 운영 매뉴얼 - 페이지 4

{카테고리_이름} FIBARO FGBHMS-001에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. FIBARO FGBHMS-001 7 페이지. Motion sensor. motion, light & temperature sensor
FIBARO FGBHMS-001에 대해서도 마찬가지입니다: 운영 매뉴얼 (14 페이지), 빠른 매뉴얼 (18 페이지)

페이지 인쇄

#4: Physical installation

Installing the Motion Sensor:

1. install the holder (using an expansion bolt or a sticker).

2. insert the device into the holder.

3. test the operation - check whether the accessory indicates motion

detection.

Installation location and working conditions:

the Motion Sensor should be installed in a corner of the room or per-

pendicularly to the doors.

Moving objects such as trees blowing in the wind, cars passing by,

household fans and moving masses of air and heat within detection

area of the sensor can cause false motion detection.

Detection range:

Detection range of the Motion Sensor is shown below. actual range

of the Sensor can be influenced by environmental conditions.

3 m

0 m

PHYSiCaL inStaLLation

Sticker

5 m

0 m

7 m

5 m

7 m

#5: Reset

Resetting the Motion Sensor to factory defaults:

Reset procedure allows to restore the accessory back to its factory

settings including HomeKit pairing.

1. open the cover.

2. Press and hold the button.

Button

3. wait for the LeD indicator to glow yellow.

4. Release the button.

5. Click the button to confirm.

6. accessory will glow red to confirm reset.

7. Delete the accessory from the app before pairing it again.

ReSet