Cisco Catalyst 3110X 하드웨어 설치 매뉴얼 - 페이지 12
{카테고리_이름} Cisco Catalyst 3110X에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 3110X 48 페이지. Catalyst switch module for ibm bladecenter
Cisco Catalyst 3110X에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (31 페이지)
페이지 인쇄
Hardware Features
Mode Button
The fault/stack or stack member LEDs are selected by using the Mode button. If the mode LED for a
particular mode is solid green, that mode is currently selected, and the other mode LEDs are off (only
Catalyst Switch Module 3110G and 3110X).
To select or change a mode, use a small pointed object to press the Mode button until the desired mode
is selected.
System Power LED
The system power LED shows whether the system is receiving power and is functioning properly.
Table 1-3
Table 1-3
Color
Off
Green
Amber
Blinking green
Stack Master LED
The stack master LED shows the stack master status.
(only Catalyst Switch Module 3110G and 3110X).
Table 1-4
Color
Off
Green
Amber
Catalyst Switch Module 3110G, 3110X, and 3012 for IBM BladeCenter Hardware Installation Guide
1-6
lists the LED colors and their meanings.
System LED
System Status
Switch module is not powered on.
Switch module is operating normally.
Switch module is receiving power but is not functioning properly.
Switch module is running the power-on self-test (POST).
Stack Master LED
Description
Switch module is not the stack master.
Switch module is the stack master or a standalone switch.
An error occurred during stack master election, or another type of
stack error occurred.
Chapter 1
Table 1-4
lists the LED colors and their meanings
Product Overview
OL-12192-01