Cisco Catalyst 3110X 하드웨어 설치 매뉴얼 - 페이지 14
{카테고리_이름} Cisco Catalyst 3110X에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Catalyst 3110X 48 페이지. Catalyst switch module for ibm bladecenter
Cisco Catalyst 3110X에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (31 페이지)
페이지 인쇄
Hardware Features
Port LEDs
The Catalyst Switch Module 3110G and 3012 port LEDs show interface activity and link status.
Table 1-8
Table 1-8
Color
Off
Green
Blinking green
When stack mode is selected on a Catalyst Switch Module 3110G, port 4 activity and link LEDs show
the status for StackWise Plus ports 1 and 2, respectively. The other port LEDs are off.
LED colors and their meanings.
Table 1-9
Color
Off
Green
The Catalyst Switch Module 3110X port status LEDs show interface activity and link status. (The LEDs
combine to display status when an X2 transceiver is inserted.)
meanings.
Table 1-10
Color
Off
Green
Blinking green
Amber
Alternating
green-amber
Catalyst Switch Module 3110G, 3110X, and 3012 for IBM BladeCenter Hardware Installation Guide
1-8
lists the LED colors and their meanings.
Catalyst Switch Module 3110G and 3012 Port LEDs
Activity LED Description
No activity.
—
Activity. Port is sending or receiving
data.
Catalyst Switch Module 3110G Port LEDs with Stack Mode Selected
Activity LED Description
No link.
Switch stack link is active.
Catalyst Switch Module 3110X Port LEDs
LED Description
No link, or port was administratively shut down.
Link present.
Activity. Port is sending or receiving data.
Port is blocked by STP and is not forwarding data, or port was
administratively shut down.
Link fault.
Chapter 1
Product Overview
Link Status LED Description
No link, or port was administratively
shut down.
Link present, or the port might be
blocked by Spanning Tree Protocol
(STP) and is not forwarding data.
—
Table 1-9
Link Status LED Description
No link.
Switch stack link is active.
Table 1-10
lists the LED colors and their
lists the
OL-12192-01