FIBARO FGMS-001 운영 매뉴얼 - 페이지 13
{카테고리_이름} FIBARO FGMS-001에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. FIBARO FGMS-001 20 페이지. Motion sensor
FIBARO FGMS-001에 대해서도 마찬가지입니다: 운영 매뉴얼 (2 페이지), 운영 매뉴얼 (11 페이지)
페이지 인쇄
9. Motion detection - night/day
This parameter defines the difference between night and day in terms
of light intensity, used in parameter 8.
Available settings: 1-32767 (1-32767 lux)
Default setting:
12. BASIC command class configuration
This parameter determines the command frames sent to 2nd associa-
tion group (assigned to PIR sensor).
Available settings: 0 - BASIC On and OFF command frames sent in
Default setting:
14. BASIC ON command frame value
The command frame sent at the moment of motion detection. Fur-
ther motion detections, during the cancellation time, will not result
in sending the association.
Available settings: 0-255
Default setting:
16. BASIC OFF command frame value
The command frame sent at the moment of motion alarm cancella-
tion, after cancellation delay time specified in parameter 6.
Available settings: 0-255
Default setting:
18. Associations in Z-Wave network Security Mode
This parameter defines how commands are sent in specified associa-
tion groups: as secure or non-secure. Parameter is active only in Z-Wave
network security mode. It does not apply to 1st group "Lifeline".
Available settings: 0 - none of the groups sent as secure
Default setting:
200 (200 lux) Parameter size:
Basic Command Class
1 - only the BASIC On command frame sent in
Basic Command Class
2 - only the BASIC OFF command frame sent in
Basic Command Class
0
Parameter size:
255
Parameter size:
0
Parameter size:
1 - 2nd group sent as secure
2 - 3rd group sent as secure
4 - 4th group sent as secure
8 - 5th group sent as secure
15
Parameter size:
2 [bytes]
1 [byte]
2 [byte]
2 [bytes]
1 [byte]
ADvAnCED PARAMETERS
13
i
NOTE
values of BASIC On
and BASIC OFF com-
mand frames can be
modified with dedi-
cated parameters (14
and 16).