FIBARO FGBHS-213 운영 매뉴얼 - 페이지 11

{카테고리_이름} FIBARO FGBHS-213에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. FIBARO FGBHS-213 13 페이지. Single switch
FIBARO FGBHS-213에 대해서도 마찬가지입니다: 매뉴얼 (9 페이지)

#7: Configurable parameters

1. Type of connected switch

This parameter allows to select type of wall switch connected to the

device.

Available settings: 0 – momentary switch

Default setting:

2. Restore state after power failure

This parameter determines if the device will return to state prior to

the power failure after power is restored.

Available settings: 0 – the device does not save the state prior to

Default setting:

1 – toggle switch (contact closed - On, contact

opened - OFF)

2 – toggle switch (device changes status when

switch changes status)

1 (toggle switch - synced)

the power failure and sets „off" position

1 – the device does not save the state prior to

the power failure and sets „on" position

2 – the device restores its state prior to the

power failure

2 (state is restored)

NOTE

If parameter 1 is set to

1, parameter 2 is irrel-

evant and device state

is always the same as

switch state.

COnFIGuRABlE PARAMETERS