Digisol DG-GS1510PL 빠른 설치 매뉴얼 - 페이지 6

{카테고리_이름} Digisol DG-GS1510PL에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digisol DG-GS1510PL 13 페이지. 8 port gigabit web managed poe switch with 2 giga sfp ports
Digisol DG-GS1510PL에 대해서도 마찬가지입니다: 연결 및 구성 (3 페이지)

페이지 인쇄
Digisol DG-GS1510PL 빠른 설치 매뉴얼
Third step: Connecting power supply
Using the AC power cord to connect to the power adapter, and then plug in
output terminal of the adapter into the DC IN socket on the back of the
switch. (The AC power outlet should be grounded)

Power failure

As a precaution, the switch should be unplugged in case of power failure.
When power is resumed, plug back the switch again.
Warning: Do not turn on the power switch before
power cables are connected. Power surge may
cause damage to the Switch.
Warning: The installation instructions clearly
state that the ITE is to be connected only to PoE
networks without routing to the outside plant.