Digisol DG-GS1510PL 빠른 설치 매뉴얼 - 페이지 8
{카테고리_이름} Digisol DG-GS1510PL에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Digisol DG-GS1510PL 13 페이지. 8 port gigabit web managed poe switch with 2 giga sfp ports
Digisol DG-GS1510PL에 대해서도 마찬가지입니다: 연결 및 구성 (3 페이지)
페이지 인쇄
Login Web-based Management
In order to login and configure the switch via an Ethernet connection, the PC
must have an IP address in the same subnet as the switch. For example, if
the switch has an IP address of 192.168.0.1, the PC should have an IP
address of 192.168.0.x (where x is a number between 1 ~ 254), and a
subnet mask of 255.255.255.0 Open the web browser and enter
192.168.0.1 (the factory-default IP address) in the address bar.
Then press <Enter>.
Enter the IP address in the web browser
NOTE: The switch's factory default IP address is
192.168.0.1 with a subnet mask of 255.255.255.0
To log in to the switch, the IP address of your PC should be set in the same
subnet as that of the switch. The IP address is 192.168.0.x ("x" is any
number from 2 to 254). Subnet Mask is 255.255.255.0.