Digisol DG-GS1510PL Quick Installation Manual - Page 8
Browse online or download pdf Quick Installation Manual for Switch Digisol DG-GS1510PL. Digisol DG-GS1510PL 13 pages. 8 port gigabit web managed poe switch with 2 giga sfp ports
Also for Digisol DG-GS1510PL: Connecting And Configuring (3 pages)
Print Page
Login Web-based Management
In order to login and configure the switch via an Ethernet connection, the PC
must have an IP address in the same subnet as the switch. For example, if
the switch has an IP address of 192.168.0.1, the PC should have an IP
address of 192.168.0.x (where x is a number between 1 ~ 254), and a
subnet mask of 255.255.255.0 Open the web browser and enter
192.168.0.1 (the factory-default IP address) in the address bar.
Then press <Enter>.
Enter the IP address in the web browser
NOTE: The switch's factory default IP address is
192.168.0.1 with a subnet mask of 255.255.255.0
To log in to the switch, the IP address of your PC should be set in the same
subnet as that of the switch. The IP address is 192.168.0.x ("x" is any
number from 2 to 254). Subnet Mask is 255.255.255.0.