Crestron CCS-UC-1-X 빠른 시작

{카테고리_이름} Crestron CCS-UC-1-X에 대한 빠른 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Crestron CCS-UC-1-X 5 페이지.
Crestron CCS-UC-1-X에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지)

페이지 인쇄
Crestron CCS-UC-1-X 빠른 시작
CCS-UC-1-X
The Crestron® CCS-UC-1-X provides video conference capabilities to a
conference room.
In the Box
1
CCS-UC-1-X, Crestron Mercury® X Tabletop UC System
Additional Items
1
Cable, USB 2.0, A - Micro B, 6 ft (1.83 m) (P/N 2047803)
1
Cable, HDMI®, Thin, 6 ft (1.8 m) (P/N 6508218)
1
Cable, CAT5e, RJ-45 Male - RJ-45 Male, 12 ft (3.66 m) (P/N
2033988)
1
Retention Plate, Cable (P/N 2047908)
3
Tie Wrap (P/N 2047935)
1
Power Pack, 24 VDC, 2.5 A, 100-240 VAC (P/N 2045873)
1
Power cord (varies by location)
Install the Cable Retention Plate
The cable retention plate provides tie-down points for cables that are
connected to the device.
Remove the adhesive backing from the cable retention plate and install it
on the underside of the CCS-UC-1-X as shown in the following diagram.
CAUTION:
When turning over the device, place the device on a soft
surface to avoid damage.
NOTES:
If the CCS-UCA-SMK swivel mount kit is to be used, use the
l
cable retention bracket included with the CCS-UCA-SMK. For
details, refer to the CCS-UCA-SMK DO Guide (Doc. 7882) at
www.crestron.com/manuals.
Before securing cables, ensure the cable retention plate is firmly
l
attached.
Quick Start
1