Crestron CCS-UC-1-X 빠른 시작 - 페이지 4

{카테고리_이름} Crestron CCS-UC-1-X에 대한 빠른 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Crestron CCS-UC-1-X 5 페이지.
Crestron CCS-UC-1-X에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (6 페이지)

CCS-UC-1-X

Route Cables

CCS-UCA-SMK Swivel Mount Kit

If the CCS-UCA-SMK swivel mount kit is used in the installation, refer to

the CCS-UCA-SMK DO Guide for installation instructions (Doc. 7882).

NOTE:

Do not route the HDMI and USB cables through the swivel tube.

USB and HDMI Cables

Insert the included USB and HDMI cables into the appropriate cable

channels on the underside of the CCS-UC-1-X.

NOTE: If the system design dictates that the USB and HDMI Input

cables should not exit through the front but at the rear with all other

cables, the USB and HDMI input cables should be bundled and secured

to the cable retention plate on the underside of the CCS-UC-1-X. Make

sure to leave enough cable for a 2- to 3- inch service loop before exiting

the rear of the device.

Power, Ethernet, HDBaseT, and Other Cables

Bundle the Ethernet, HDBaseT, and other cables together and use a

provided tie wrap to secure the bundle to one of the positions on the cable

retention plate.

For details on configuring the device, refer to the CCS-UC-1 Product

Manual (Doc. 7844).

Quick Start