Crestron CCS-UC-1-X Hızlı Başlangıç - Sayfa 4

Konferans Sistemi Crestron CCS-UC-1-X için çevrimiçi göz atın veya pdf Hızlı Başlangıç indirin. Crestron CCS-UC-1-X 5 sayfaları.
Ayrıca Crestron CCS-UC-1-X için: Hızlı Başlangıç Kılavuzu (6 sayfalar)

Sayfayı Yazdır
Crestron CCS-UC-1-X Hızlı Başlangıç
CCS-UC-1-X

Route Cables

CCS-UCA-SMK Swivel Mount Kit
If the CCS-UCA-SMK swivel mount kit is used in the installation, refer to
the CCS-UCA-SMK DO Guide for installation instructions (Doc. 7882).
NOTE:
Do not route the HDMI and USB cables through the swivel tube.
USB and HDMI Cables
Insert the included USB and HDMI cables into the appropriate cable
channels on the underside of the CCS-UC-1-X.
NOTE: If the system design dictates that the USB and HDMI Input
cables should not exit through the front but at the rear with all other
cables, the USB and HDMI input cables should be bundled and secured
to the cable retention plate on the underside of the CCS-UC-1-X. Make
sure to leave enough cable for a 2- to 3- inch service loop before exiting
the rear of the device.
Power, Ethernet, HDBaseT, and Other Cables
Bundle the Ethernet, HDBaseT, and other cables together and use a
provided tie wrap to secure the bundle to one of the positions on the cable
retention plate.

Configure Settings

For details on configuring the device, refer to the CCS-UC-1 Product
Manual (Doc. 7844).
Quick Start
4