Crestron CCS-UC-1-X Démarrage rapide - Page 4

Parcourez en ligne ou téléchargez le pdf Démarrage rapide pour {nom_de_la_catégorie} Crestron CCS-UC-1-X. Crestron CCS-UC-1-X 5 pages.
Également pour Crestron CCS-UC-1-X : Manuel de démarrage rapide (6 pages)

Imprimer la page
Crestron CCS-UC-1-X Démarrage rapide
CCS-UC-1-X

Route Cables

CCS-UCA-SMK Swivel Mount Kit
If the CCS-UCA-SMK swivel mount kit is used in the installation, refer to
the CCS-UCA-SMK DO Guide for installation instructions (Doc. 7882).
NOTE:
Do not route the HDMI and USB cables through the swivel tube.
USB and HDMI Cables
Insert the included USB and HDMI cables into the appropriate cable
channels on the underside of the CCS-UC-1-X.
NOTE: If the system design dictates that the USB and HDMI Input
cables should not exit through the front but at the rear with all other
cables, the USB and HDMI input cables should be bundled and secured
to the cable retention plate on the underside of the CCS-UC-1-X. Make
sure to leave enough cable for a 2- to 3- inch service loop before exiting
the rear of the device.
Power, Ethernet, HDBaseT, and Other Cables
Bundle the Ethernet, HDBaseT, and other cables together and use a
provided tie wrap to secure the bundle to one of the positions on the cable
retention plate.

Configure Settings

For details on configuring the device, refer to the CCS-UC-1 Product
Manual (Doc. 7844).
Quick Start
4