Sharp 21HT-16CS 서비스 매뉴얼 - 페이지 13

{카테고리_이름} Sharp 21HT-16CS에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp 21HT-16CS 44 페이지. Pal secam b/g, d/k system colour television

3.2.3. Select "HTL-VOL" by using channel up/down buttons.

3.2.4. Set the value according to your necessities by using volume up/down buttons.

3.2.5. Change initial value from "0" (off ) to "1" (on).

3.2.6. Note: If you do not need to set up Hotel Mode "HTL-PRG" get out from Service Mode (To exit the Service

Mode press the stand-by button on the remote control or turn the receiver off with the mains switch).

3.3. Hotel Mode "HTL-PRG" (Fixing start up program when the TV Set is switched on)

3.3.1. Initial value: 255. Range: 0 to 255. Service Mode indication: HTL-PRG.

3.3.2. To activate this Hotel Mode it is necessary activate previously Hotel Mode "HTL".

3.3.4. Select "HTL-PRG" by using channel up/down buttons.

3.3.3. The initial value to 255, ensures that the TV Set starts up in the same program number that it was been

displayed before turn it off.

3.3.4 If you want to fix other program number proceed as follows set the value according to your necessities by

using volume up / down buttons. Use values between 0 to 99. In this way, the new program number appear

fixed when you start up the TV set.

Example: If you would like to set starting program number "2", change from 255 to 2.

3.3.5. Get out from Service Mode (To exit the Service Mode press the stand-by button on the remote control or turn

the receiver off with the mains switch).

21HT-15C

21HT-16C