Sharp AQUOS CD-BA250 운영 매뉴얼 - 페이지 24
{카테고리_이름} Sharp AQUOS CD-BA250에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AQUOS CD-BA250 36 페이지. Led backlight tv
Sharp AQUOS CD-BA250에 대해서도 마찬가지입니다: 운영 매뉴얼 (32 페이지), 빠른 매뉴얼 (4 페이지)
![Sharp AQUOS CD-BA250 운영 매뉴얼](/uploads/products/server2/5045561/5045561.jpg)
PC Control of the TV
• When a programme is set, the TV can be controlled
from the PC using the RS-232C terminal.
The input signal (PC/video) can be selected, the
volume can be adjusted and various other adjustments
and settings can be made, enabling automatic
programmed playing.
• Attach an RS-232C cable cross-type (commercially
available) to the Din/D-sub RS-232C for the
connections.
NOTE
• This operation system should be used by a person who is
accustomed to using PCs.
Communication conditions
Set the RS-232C communications settings on the PC
to match the communications conditions of the TV. The
communications settings of the TV are as follows:
Baud rate:
Data length:
Parity bit:
Stop bit:
Flow control:
Communication procedure
Send the control commands from the PC via the
RS-232C connector.
The TV operates according to the received command
and sends a response message to the PC.
Do not send multiple commands at the same time. Wait
until the PC receives the OK response before sending the
next command.
Command format
Eight ASCII codes e CR
C1 C2 C3 C4 P1 P2 P3 P4
Command 4-digits
Parameter 4-digits Return code
Command 4-digits: Command. The text of four characters.
Parameter 4-digits: Parameter 0 – 9, space, ?
Parameter
Input the parameter values, aligning left, and fill with
space(s) for the remainder. (Be sure that four values are
input for the parameter.)
When the input parameter is not correct, "ERR" returns.
(Refer to "Response code format".)
0
0
Response code format
Normal response
O
K
Return code (0DH)
Problem response (communication error or incorrect
command)
E
R
22
9,600 bps
8 bits
None
1 bit
None
a
0
0
9
3
0
R
Return code (0DH)