Sharp CD-BA2600H 운영 매뉴얼 - 페이지 23

{카테고리_이름} Sharp CD-BA2600H에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD-BA2600H 42 페이지. Mini component system
Sharp CD-BA2600H에 대해서도 마찬가지입니다: 운영 매뉴얼 (5 페이지)

Listening to the Memorised Station

„ Memorising a station
You can store 40 AM and FM stations in memory and recall them at the push of a but-
ton. (Preset tuning)
1
Perform the steps 1 - 3 in "Listening to the Radio" on page 16.
2
Press the MEMORY/SET button to enter the preset tuning saving
mode.
3
Within 30 seconds, press the
button to select the preset channel number.
Store the stations in memory, in order, starting with preset channel 1.
4
Within 30 seconds, press the MEMORY/SET button to store that
station in memory.
If the "MEMORY" and preset number indicators go out before the station is
memorised, repeat the operation from step 2.
5
Repeat steps 1 - 4 to set other stations, or to change a preset sta-
tion.
When a new station is stored in memory, the station previously memorised will
be erased.
Note:
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead disconnection.
PRESET
or
PRESET
„ To recall a memorised station
Press the
PRESET
or
0.5 seconds to select the desired station.
Preset channel
This can be operated by pressing the PRESET (
control.
„ To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory scan)
1
Press the
PRESET
than 0.5 seconds.
z The preset number will flash and the programmed stations will be tuned in se-
quentially, for 5 seconds each.
z This can be operated by pressing the PRESET (
control.
2
Press the
PRESET
or
the desired station is located.
„ To erase entire preset memory
1
Press the ON/STAND-BY button to enter the power stand-by mode.
2
Whilst pressing down the TUNER (BAND) button and the X-BASS/DEMO button,
press the ON/STAND-BY button until "TUNER CL" appears.
Listening to the Radio (See page 16.)
PRESET
button for less than
Frequency and frequency band
or
) button on the remote
or
PRESET
button for more
or
) button on the remote
PRESET
button again when
ENGLISH
E-17