Sharp CD-E600H 운영 매뉴얼 - 페이지 31

{카테고리_이름} Sharp CD-E600H에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp CD-E600H 41 페이지. Mini component system

페이지 인쇄

1. Specifications

! To recall stations in memory

To specify programmed types and select stations (PTY

search):

You can search a station by specifying the programme type (news,

sports, traffic programme, etc. ... see pages 21 - 22) from the sta-

tions in memory.

Press the TUNER (BAND) button to select the FM.

Press the PTY.TI SEARCH button.

"SELECT" and "PTY TI" will appear alternately for about 6 sec-

onds.

Within 6 seconds, press the PRESET (

lect the programme type.

Each time the button is pressed, the programme type will ap-

pear. If the button is held down for more than 0.5 seconds, the

programme type will appear continuously.

Whilst the selected programme type is flashing (within 6

seconds), press the PTY.TI SEARCH button again.

After the selected programme type has been lit for 2 seconds,

"SEARCH" will appear, and the search operation will start.

Notes:

" If the display has stopped flashing, start again from step 2. If the

unit finds a desired programme type, the corresponding channel

number will flash for about 4 seconds, and then the station name

will flash for 7 seconds, which will remain lit.

" If you want to listen to the same programme type of another sta-

tion, press the PTY.TI SEARCH button whilst the channel num-

ber or station name is flashing. The unit will look for the next

station.

" If no station can be found, "NOTFOUND" will appear for 4 sec-

onds.

If you select the traffic programme:

If you select the traffic programme (TP) in step 4, "TP" will appear.

(This does not mean that you can listen to the traffic information at

that time.)

When the traffic information is broadcast, "TA" will appear.

) button to se-

To specify station names and select stations manually:

You can select a station by specifying the name (BBC R1, BBC R2,

etc.) from the stations stored in memory.

Before starting this operation, you must store one or more station

names in memory.

1 Press the TUNER (BAND) button to select the FM band.

2 Press the PRESET (

3 The station name will be displayed for 6 seconds. Then the dis-

play will change as follows.

02/12/24

) button to select a desired station.

CD-E600H(H)E3.fm

CD-E600H

ENGLISH

E-24