Sharp XL-UH2080H 운영 매뉴얼 - 페이지 25

{카테고리_이름} Sharp XL-UH2080H에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp XL-UH2080H 40 페이지.

To recall a memorised station

Press the PRESET (

) button for less than 0.5 seconds to

select the desired station.

To scan the preset stations

The stations saved in memory can be scanned automatically.

(Preset memory scan)

1 Press the PRESET (

The preset number will flash and the programmed stations will be

tuned in sequentially, for 5 seconds each.

2 Press the PRESET (

station is located.

To erase entire preset memory

1 Press the ON/STAND-BY button to enter the stand-by mode.

2 Whilst pressing down the

button until "TUNER CLEAR" appears.

) button for more than 0.5 seconds.

) button again when the desired

button, press the TUNER (BAND)

Using the Radio Data System (RDS)

RDS is a broadcasting service which a growing number of FM

stations provide. These FM stations send additional signals

along with their regular programme signals. They send their sta-

tion names, and information about the type of programme such

as sport, music, etc.

When tuned to an RDS station, "RDS" and the station name will be

displayed.

"TP" (Traffic Programme) will appear on the display when the

received broadcast carries traffic information, and "TA" (Traffic

Announcement) will appear whilst a traffic information is on air.

"PTYI" (Dynamic PTY Indicator) will appear whilst the Dynamic PTY

station is received.

You can control the RDS by using the buttons on the remote

control only.

XL-UH2080H