Sharp AL-1035-WH A 운영 매뉴얼 - 페이지 10

{카테고리_이름} Sharp AL-1035-WH A에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AL-1035-WH A 50 페이지. Digital multifunctional system
Sharp AL-1035-WH A에 대해서도 마찬가지입니다: 수동 시작 (28 페이지)

페이지 인쇄

PAPER FEEDING

Ensure that the machine is not printing or copying, and carry out paper feeding according to the following steps.

Feeding the feed tray

Expand the feed tray.

Adjust the paper guide to the proper

position according to the paper size.

Load the paper onto the feed tray.

• The loaded paper cannot exceed the limit of

Note

the paper guide (max. 40 pieces).

• Do not add paper onto the loaded paper.

Otherwise, several pieces of paper will be

fed into the machine at one time.

• To add paper, remove the paper remaining

on the feed tray and combine them into one

stack before loading. The size and type of

the added paper shall be consistent with

the previous one.

• Do not use paper smaller than the size of

the original. Otherwise folding or an

incomplete image may be resulted in.

• Do not use paper that has been printed by

another printer or multifunction device.

Otherwise, a folded or corrupted image

may be resulted in.

• When printing on the reverse side of

previously printed paper, the paper must be

loaded one sheet at a time. Loading more

than one sheet at a time may cause

misfeeds or dirty.

Open the paper package,

flip the paper fully, and

then load into the tray.

Place the paper completely on the

feed tray.

• In the case of a misfeed, tidy the paper and

Note

reload it.

• Flatten curled paper before using it.

• When loading the paper, align with the

proper position on the paper guide.

• When misfeed occurs, rotate the paper 180

degrees and reload.

BEFORE USING THE MACHINE