Sharp AL-1035-WH A 운영 매뉴얼 - 페이지 9

{카테고리_이름} Sharp AL-1035-WH A에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AL-1035-WH A 50 페이지. Digital multifunctional system
Sharp AL-1035-WH A에 대해서도 마찬가지입니다: 수동 시작 (28 페이지)

페이지 인쇄

Print side face up

Load the paper with the print side face up according to the paper type.

Paper that cannot be used

• Special media for inkjet printers (fine paper, glossy

paper, glossy film, etc.)

• Carbon paper or thermal paper

• Irregularly shaped paper

• Pasted paper, stapled paper, paper with clips

• Damp paper

Non-recommended paper

• Iron-on transfer paper

• Paper which reverse side has been printed by other

printer or multifunctional device

• Paper which printing surface has been printed by

another printer or multifunctional device

• Various types of plain paper and special media are sold. Some types cannot be used with the machine. Contact your

dealer or nearest authorised service representative for advice on using these types of paper.

• The image quality and toner fusibility of paper may change due to ambient conditions, operating conditions, and paper

characteristics, resulting in image quality inferior to that of SHARP standard paper. Contact your dealer or nearest

authorised service representative for advice on using these types of paper.

• The use of non-recommended or prohibited paper may result in skewed feeding, misfeeds, poor toner fusing (the toner

does not adhere to the paper well and can be rubbed off), or machine failure. Before using non-recommended paper,

check if printing can be performed properly.

• Paper with folds marks, torn paper or curled paper

• Paper with a wave-like pattern due to moisture

absorption

• Transparent film

• Thin paper less than 56g/m

• Paper that is 128g/m

• Perforated paper

• Postcards without folds

BEFORE USING THE MACHINE

or heavier