Sharp AL-1035-WH A 운영 매뉴얼 - 페이지 18
{카테고리_이름} Sharp AL-1035-WH A에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AL-1035-WH A 50 페이지. Digital multifunctional system
Sharp AL-1035-WH A에 대해서도 마찬가지입니다: 수동 시작 (28 페이지)
페이지 인쇄
REDUCTION/ENLARGEMENT
With the ZOOM function, you can select copy ratio between AB system: A5 → A4 (141%), A4 → A5 (70%),
Inch system: 5.5X8.5 → 8.5X11(129%), 8.5X11 → 5.5X8.5 (64%), and 50%.
The method for enlarging or reducing the copies is described below.
With the [MODE SELECT] key (
Selectable ratios:
Original position
Document glass
MANUAL RATIO SELECTION
Copies can be reduced down to A4 → A5 (70%), (8.5X11 → 5.5X8.5 (64%)) and 50%, or enlarged up to A5 → A4
(141%), (5.5X8.5 → 8.5X11(129%)). Press the [MODE SELECT] key (
1
Place the original on the document
glass.
Be sure to close the document cover after
Note
placing the original. If left open, the area
outside the original will be copied black,
causing excessive use of toner.
2
Use the [MODE SELECT] key (
select the desired copying ratio.
Select the correct paper according to the
Note
ratio, otherwise, the image will be printed
outside the paper.
), you can manually select the ratio of reduction or enlargement.
AB system: A5 → A4 (141%), A4 → A5 (70%) and 50%
Inch system: 5.5X8.5 → 8.5X11(129%), 8.5X11 → 5.5X8.5 (64%) and 50%
) to
Selecting a fixed ratio
Press the [MODE
SELECT] key (
) and
select a fixed ratio
(AB system: A5 → A4
(141%), A4 → A5 (70%),
and 50%.
Inch system: 5.5X8.5 →
8.5X11(129%), 8.5X11 →
5.5X8.5 (64%) and 50%).
Selectable ratios
) to select a ratio.
3
Set the number of copies and other
settings, and then press the [COPY
START] key (
The copy will be delivered to the paper output
tray.
To return the ratio to 100%, press the [MODE
Note
SELECT] key (
lights up.
17
).
) until the 100% indicator