Sharp AL-1633 온라인 매뉴얼 - 페이지 6

{카테고리_이름} Sharp AL-1633에 대한 온라인 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AL-1633 32 페이지. Digital multifunctional system
Sharp AL-1633에 대해서도 마찬가지입니다: 소프트웨어 설정 매뉴얼 (20 페이지)

페이지 인쇄

Basic Printing

If the tray runs out of paper during printing

Add paper to the tray or press the [TRAY SELECT] key (

select a different tray, and then press the [ON LINE] key (

resume printing.

Note that if "Auto tray switching" (in the user programs) is

enabled on a 2-tray model and "Auto Select" is selected in

"Paper Source" in the printer driver, the machine will

automatically switch to the other tray and continue printing.

Pausing a print job

To pause a print job during printing, press the [ON LINE] key

(

) on the operation panel to switch the machine off-line.

Printing will be paused and the ON LINE indicator will blink.

To cancel a print job, press the [CLEAR] key (

[CLEAR ALL] key

(

)

To resume printing, press the [ON LINE] key (

machine online.

CONTENTS

) or the

) to switch the

I N D E X

When "Paper Source" is set to "Auto Select"

) to

If "Paper Source" is set to "Auto Select" in the "Paper" tab of the

) to

printer driver setup screen and the correct size of paper for a

print job is not loaded in the machine, the printing procedure will

vary depending on the "Use Close Paper Size" setting in the user

programs (see "USER PROGRAMS" in the Operation Manual).

When "Use close paper size" is disabled

The PAPER SIZE indicator on the

operation panel will blink. You can press

the [TRAY SELECT] key (

tray manually, or load paper in the

bypass tray and press the [ON LINE]

key (

) to begin printing.

* The paper sizes that appear in the

operation panel will vary by country and region.

When "Use close paper size" is enabled

Printing will take place using a size of paper that is close to the

size of the print image.

Before printing make sure that the paper size set in "Set

Note

Tray Status" of the printer driver is the same as the size

of paper loaded in the tray. (See "CONFIGURING THE

PRINTER DRIVER" in the Software Setup Guide.)

When printing, if you select the paper tray with the correct

size of paper for the document to be printed, printing will

take place correctly (select the paper tray in "Paper source"

in the "Paper" tab of the printer driver setup screen).

(part 2)

) to select a

EXTRA