Sharp AL-1633 Manual online - Página 6
Procurar online ou descarregar pdf Manual online para Impressora tudo em um Sharp AL-1633. Sharp AL-1633 32 páginas. Digital multifunctional system
Também para Sharp AL-1633: Manual de configuração do software (20 páginas)
![Sharp AL-1633 Manual online](/uploads/products/server2/5048023/5048023.png)
1
PRINT
Basic Printing
If the tray runs out of paper during printing
Add paper to the tray or press the [TRAY SELECT] key (
select a different tray, and then press the [ON LINE] key (
resume printing.
Note that if "Auto tray switching" (in the user programs) is
enabled on a 2-tray model and "Auto Select" is selected in
"Paper Source" in the printer driver, the machine will
automatically switch to the other tray and continue printing.
Pausing a print job
To pause a print job during printing, press the [ON LINE] key
(
) on the operation panel to switch the machine off-line.
Printing will be paused and the ON LINE indicator will blink.
G
To cancel a print job, press the [CLEAR] key (
[CLEAR ALL] key
.
(
)
G
To resume printing, press the [ON LINE] key (
machine online.
CONTENTS
) or the
) to switch the
I N D E X
When "Paper Source" is set to "Auto Select"
) to
If "Paper Source" is set to "Auto Select" in the "Paper" tab of the
) to
printer driver setup screen and the correct size of paper for a
print job is not loaded in the machine, the printing procedure will
vary depending on the "Use Close Paper Size" setting in the user
programs (see "USER PROGRAMS" in the Operation Manual).
When "Use close paper size" is disabled
The PAPER SIZE indicator on the
operation panel will blink. You can press
the [TRAY SELECT] key (
tray manually, or load paper in the
bypass tray and press the [ON LINE]
key (
) to begin printing.
* The paper sizes that appear in the
operation panel will vary by country and region.
When "Use close paper size" is enabled
Printing will take place using a size of paper that is close to the
size of the print image.
Before printing make sure that the paper size set in "Set
Note
Tray Status" of the printer driver is the same as the size
of paper loaded in the tray. (See "CONFIGURING THE
PRINTER DRIVER" in the Software Setup Guide.)
When printing, if you select the paper tray with the correct
size of paper for the document to be printed, printing will
take place correctly (select the paper tray in "Paper source"
in the "Paper" tab of the printer driver setup screen).
(part 2)
A3
A4
) to select a
A4
A5
B4
EXTRA
6