Sharp AR-203E X 온라인 매뉴얼 - 페이지 31

{카테고리_이름} Sharp AR-203E X에 대한 온라인 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-203E X 39 페이지. Digital multifunctional system
Sharp AR-203E X에 대해서도 마찬가지입니다: 프린터 사용 설명서 (44 페이지), 주의 사항 리플렛 (37 페이지)

페이지 인쇄

Nothing Prints

If nothing prints even when the unit is turned on, please wait a few moments. The unit needs a longer time to process

intricate data. If the unit still does not print, refer to the check list below.

CHECK 1

Has a paper jam occurred?

When the misfeed (

blinks in the display, the unit will stop because of a

misfeed.

Remove the jammed paper as explained in

"MISFEED REMOVAL" in the Operation Manual.

CHECK 2

Is the ON LINE indicator off?

The ON LINE indicator on the operation panel turns

off while the unit is used for copying. Scanning and

printing is not possible at this time. When copying is

finished, the ON LINE indicator will turn on after the

set auto clear time elapses, and the unit will be

ready for scanning and printing. You can also press

the clear key twice or press the ON LINE key to

make the unit ready for scanning or printing.

CHECK 3

Is your unit selected correctly in the current

application for the print job?

When choosing "Print" from the "File" menu located in

applications, be sure you have selected "SHARP

AR-xxxx" printer displayed in the "Print" dialog box.

SHARP

AR-xxxx

) indicator blinks or (

)

CHECK 4

Has the printer driver been installed

properly?

Check if the printer driver has been installed, following

the steps listed below.

Click the "start" button, click "Control Panel",

click "Printers and Other Hardware", and then

click "Printers and Faxes".

• On Windows Vista, click the "start" button, click

"Control Panel" and then click "Printer".

• On Windows 98/Me/2000, click the "Start" button,

select "Settings" and then click "Printers".

Check if the "SHARP AR-xxxx" printer driver

icon is shown.

If you still cannot print after confirming the "SHARP

AR-xxxx" printer driver icon, the printer driver may not

have been installed correctly. In this case, delete the

software and then reinstall it.

Reference:

Uninstalling the Software

CONTENTS

SHARP AR-xxxx

INDEX