Sharp AR-203E X 온라인 매뉴얼 - 페이지 32

{카테고리_이름} Sharp AR-203E X에 대한 온라인 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-203E X 39 페이지. Digital multifunctional system
Sharp AR-203E X에 대해서도 마찬가지입니다: 프린터 사용 설명서 (44 페이지), 주의 사항 리플렛 (37 페이지)

페이지 인쇄

Poor Scanning Result

If you get poor quality as a result of scanning a job, and you cannot improve the quality by changing preferences, refer

to the check list shown below.

CHECK 1

Is the original clean?

Check your original before scanning. If any dust

sticks to the original, you cannot obtain a clean

result. In addition, make sure that the document

glass is also clean.

CHECK 2

Have you specified a suitable resolution?

Make sure that the value for the "Resolution" setting

in the scanner driver satisfies the requirement of the

set original.

Reference:

Scanning an Image from a TWAIN-

Compliant

Scanning an Image from a WIA-Compliant

Application (Windows

Scanning an Image from the "Scanner and

Camera Wizard" (Windows XP/Vista),

CHECK 3

Have you specified a suitable value for the

"B/W Threshold" setting?

If you are scanning with a TWAIN-compliant

application and are using "Mono 2 gradation (no

Green)","Mono 2 gradation (no Red)" or "Mono 2

gradation (no Blue)" mode, make sure that a

suitable value is specified for the "B/W Threshold"

setting. A larger threshold value makes your output

darker, whilst a small threshold value makes it

lighter. To adjust the threshold automatically, click

the "Auto Threshold" button on the "Image" tab of

the "Custom Settings" screen.

Reference:

Scanning an Image from a TWAIN-

Compliant Application

Application,

XP/Vista),

CHECK 4

Have you adjusted the brightness and

contrast suitably?

If you are scanning with a TWAIN-compliant

application and the resulting image has unsuitable

brightness or contrast (for example it is too bright),

activate the "Auto Brightness/Contrast Adjustment"

setting on the "Color" tab of the

screen.

If you are scanning with a WIA-compliant

application or the "Scanner and Camera Wizard",

click

"Adjust the quality of the scanned picture"

the

"Custom settings"

brightness and contrast in the screen that appears.

CONTENTS

"Custom settings"

button, and adjust the

INDEX