Sharp AR-C260 주요 운영자 매뉴얼 - 페이지 11
{카테고리_이름} Sharp AR-C260에 대한 주요 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-C260 19 페이지. Color adjustment
Sharp AR-C260에 대해서도 마찬가지입니다: 네트워크 스캐너 운영 (42 페이지), 프린터 사용 설명서 (50 페이지), 소프트웨어 설치 매뉴얼 (25 페이지), 컬러 관리 매뉴얼 (8 페이지), 설치 매뉴얼 (15 페이지), 사용자 설명서 (8 페이지)
페이지 인쇄
I Device control
These programs are used to enable or disable the
use of a peripheral device.
Original size detector setting
This program is used to select the group of original
sizes to be detected. Original size detection from
the document glass can be disabled using the
program CANCEL DETECTION AT DOCUMENT
GLASS.
Detectable original sizes
Document feeder tray (for reversing
Group
automatic document feeding)
Document glass
11" x 17", 8-1/2" x 14",
8-1/2" x 11",
1 INCH - 1
8-1/2" x 11"R,
5-1/2" x 8-1/2"
11" x 17", 8-1/2" x 13",
8-1/2" x 11",
2 INCH - 2
8-1/2" x 11"R,
5-1/2" x 8-1/2"
A3, A4, A4R, A5,
3 AB - 1
B4, B5, B5R
A3, A4, A4R, A5,
4 AB - 2
B5, B5R, 8-1/2" x 13"
If CANCEL DETECTION AT DOCUMENT GLASS
is set, originals will be regarded as EXTRA for all
copier functions and no original size will be
displayed.
Disabling of document feeder
This program is used to prevent use of the
reversing automatic document feeder when it
malfunctions. In this case, scanning can still be
performed using the document glass.
Disabling of duplex
This program is used to disable duplex printing
when the duplex module malfunctions. If this
program is set, only one-sided printing can be
performed.
Disabling of inverter
Use this program when you need to prohibit the
inverter function or when the duplex bypass/
inverter unit has failed. When the program is turned
on, pages are only output face-down to the centre
tray of the machine. Duplex printing is also not
possible (only one-sided printing is possible).
Disabling of stapler
This program is used to disable stapling when the
stapler
unit
of
the
malfunctions.
A3, B4, A4,
B5, B5R
A3, B4, A4,
B5, B5R
11" x 17", 8-1/2" x 14",
8-1/2" x 11"
11" x 17", 8-1/2" x 11",
B4
saddle
stitch
finisher
Disabling of optional paper drawer
This program is used to disable use of the stand/1
x 500 sheet paper drawer, stand/3 x 500 sheet
paper drawer or duplex module/2 x 500 sheet
paper drawer when it malfunctions.
Disabling of shifter
Use this program when you need to prohibit the
shifter function in the centre tray or when the shifter
has failed. When the program is turned on, the
offset feature that offsets sets of copies or printed
pages in the centre tray will not function.
Disabling of finisher
This program is used to disable use of the saddle
stitch finisher when it malfunctions.
GENERAL PROGRAMS
9