Sharp AR-C260M 프린터 사용 설명서 - 페이지 20

{카테고리_이름} Sharp AR-C260M에 대한 프린터 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-C260M 50 페이지. Color adjustment
Sharp AR-C260M에 대해서도 마찬가지입니다: 네트워크 스캐너 운영 (42 페이지), 주요 운영자 매뉴얼 (19 페이지), 소프트웨어 설치 매뉴얼 (25 페이지), 컬러 관리 매뉴얼 (8 페이지), 설치 매뉴얼 (15 페이지), 사용자 설명서 (8 페이지)

SELECTING PRINTING FUNCTIONS

Advanced settings

The following screen appears when the Advanced Settings tab is selected. The settings and buttons in this screen

are explained below.

Image Quality

This item is used to select the [Resolution

Settings] and [Graphics Mode] for printing.

[Resolution Settings]

Select 300 dpi or 600 dpi.

Default setting: 600 dpi

[Graphics Mode]

Select [Raster] or [HP-GL/2]. Select [Raster] to

print using raster graphics. Select [HP-GL/2] to

print using HP-GL/2 commands.

Default setting: HP-GL/2

Margin Shift

Use this setting to shift the document image to

move the margin at the left, right, or top of the

paper. Select from [None], [10mm.], [20mm.], or

[30mm.].

Default setting: None

Page Protection

If an error occurs because there is too much print

data, selecting this checkbox may enable printing

to take place. Try selecting this checkbox when a

print error occurs. (If only standard memory is

installed (128 MB), this setting cannot be

selected.)

Default setting: Not selected

TABLE OF CONTENTS

Overlays

Select this setting to print the document as an

overlay on a previously created form. The form

must have been previously stored.

Default setting: No Overlay

[Edit]

Click this button to open the overlay settings

screen. The form selected in this screen will be

used for the overlay.

Font

Click this button to change the font settings.

BEGINNING OF CHAPTER

2-8