Sharp AR-M150 Online 온라인 매뉴얼 - 페이지 35

{카테고리_이름} Sharp AR-M150 Online에 대한 온라인 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-M150 Online 43 페이지. Digital multifunctional system
Sharp AR-M150 Online에 대해서도 마찬가지입니다: 서비스 매뉴얼 (6 페이지)

페이지 인쇄

TROUBLESHOOTING

Troubleshooting

Problem

The machine does not print.

CONTENTS

The printer driver has not been installed properly.

→ Follow these steps to check and see if the printer driver is installed.

1 Click the "start" button, click "Control Panel", click "Printers and Other Hardware",

and then click "Printers and Faxes".

(On Windows 95/98/Me/NT 4.0/2000, click the "Start" button, select "Settings" and

then click "Printers".)

2 Does the "SHARP AR-XXXX" printer driver icon appear?

3 If the icon is shown but you still cannot print, the printer driver may not have been

installed correctly.

In this case, delete "SHARP AR-M150/168 Series MFP Driver" and then reinstall it.

A copy job is in progress.

→ Wait until the copy job is finished.

The size of paper loaded in the tray is different from the paper size setting in the

machine.

→ Make sure that the size of paper loaded in the tray and the machine's paper size

setting agree.

The specified size of paper has not been loaded.

→ Load the specified size of paper in the paper tray.

The "FORCED OUTPUT" setting is set to "OFF".

→ When "FORCED OUTPUT" is set to "OFF" and there is no paper in the machine that

is the same size as the print image, load paper in the bypass tray as instructed by the

message in the display and press the [START] key to begin printing. (The bypass tray

cannot be used for two-sided printing.) If "FORCED OUTPUT" is set to "ON", the job

will be printed on the paper in the machine even though it is a different size.

I N D E X

Cause and solution

(part 2)

Page

Operation

Manual

Operation

Manual

Operation

Manual