Sharp AR-M161 운영 매뉴얼 - 페이지 17
{카테고리_이름} Sharp AR-M161에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-M161 35 페이지. Digital multifunctional system
SCANNING FROM A TWAIN-COMPLIANT
APPLICATION
The SHARP scanner driver is compatible with the TWAIN standard, allowing it to be used with a variety of
TWAIN-compliant applications. The procedure for scanning from some applications may differ in places from the
procedure below. For more information, refer to the manual or the help file of your application.
1
Place the original(s) that you wish to
scan on the document glass or in the
SPF.
For information on placing an original for
scanning, see "4. COPY FUNCTIONS" in the
"Operation manual (for general information and
copier)".
2
Start up a Twain-compliant
application and select [Select
Scanner] from the [File] menu.
3
Select [SHARP MFP TWAIN G] and
then click the [Select] button.
• If you are using Windows XP, you can
Note
also select [WIA-SHARP AR-XXXX] to
scan using the WIA driver.
SCANNING FROM A WIA-COMPLIANT
APPLICATION (WINDOWS XP) (page 20)
• Depending on your system, [SHARP MFP
TWAIN G 1.0 (32-32)] or [WIA-SHARP
AR-XXXX 1.0 (32-32)] may appear in the
above select source screen.
4
Select [Acquire Image] from the [File]
menu.
The scanner driver setup screen will appear.
SCANNER DRIVER SETTINGS (page 18)
16
5
In the "Scanning Position" menu,
select the location where you placed
the original in Step 1.
• If you placed a one-sided original in the SPF,
select [SPF (Simplex)].
• If you placed a two-sided original in the RSPF,
select [SPF (Duplex-Book)] or [SPF
(Duplex-Tablet)].
• If you selected [SPF (Duplex-Book)] or
Note
[SPF (Duplex-Tablet)] from the "Scan
Position" menu, select [Right Edge Fed
First] or [Leading Edge Fed First] for the
orientation of the original.
• For original sizes for which two-sided
scanning is possible, see "REVERSING
SINGLE PASS FEEDER / SINGLE PASS
FEEDER" in "3. PERIPHERAL DEVICES
AND SUPPLIES" in the "Operation
manual (for general information and
copier)".
6
Click the [Preview] button.
The preview image will appear.
• If the angle of the image is not correct,
Note
reset the original and click the [Preview]
button again.
• If the preview image is not oriented
correctly, click the [Rotate] button in the
preview screen. This rotates the preview
image 90 degrees clockwise, allowing you
to correct the orientation without resetting
the original.
Preview screen (page 19)
• If you inserted multiple pages in the SPF,
the machine previews only the top page of
the originals and then sends it to the
original exit area. Return the previewed
original to the SPF before starting the
scanning job.