Sharp AR-M161 운영 매뉴얼 - 페이지 27

{카테고리_이름} Sharp AR-M161에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-M161 35 페이지. Digital multifunctional system

KEY OPERATOR PROGRAMS

The key operator programs allow the administrator of the machine (key operator) to enable and disable functions to

suit the needs of the workplace. This chapter explains key operator programs for the printer and scanner functions.

For key operator programs that are common to all modes, see the "Key operator's guide".

For the initial key operator code set at the factory, see "PROGRAMMING A KEY OPERATOR CODE" in the "Key

operator's guide".

KEY OPERATOR PROGRAM LIST

The key operator programs for the printer and scanner functions are shown in the following table. Factory default

settings are indicated in bold. When "ENABLE, DISABLE" appears in the "Settings" column of a program, the

program is enabled by pressing the [OK] key so that a checkmark appears in the checkbox. A checkmark in the

checkbox (

) indicates that "ENABLE" is selected. No checkmark (

Mode

Printer

NOTICE PAGE

FORCED OUTPUT OF

Scanner

DISABLE USB SCAN

Program

ENABLE, DISABLE

YES, NO

) indicates that "DISABLE" is selected.

Settings

Select whether or not a Notice Page

30)

is printed when printing is not successful

due to a memory full (or other) error.

When no tray has the specified size of paper,

this setting is used to select whether or not

the print job will be printed on the closest size

of paper.

Select whether or not scanning from a

computer and scanning from the machine are

disabled when a USB connection is used.

When "YES" is selected, USB scanning is

disabled.

Explanation

(page