Sharp AR-M161 운영 매뉴얼 - 페이지 28
{카테고리_이름} Sharp AR-M161에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-M161 35 페이지. Digital multifunctional system
USING THE KEY OPERATOR PROGRAMS
Follow the steps below to access the key operator settings for the printer and scanner functions.
1
Press the [SPECIAL FUNCTION] key.
The special function screen
appears.
DUPLEX
SPECIAL FUNCTION
DUPLEX SCAN
DUPLEX SCAN
ACC.
2
Select "KEY OPERATOR PRG." with
the [ ] or [ ] key.
GH
PQR
DUPLEX
SPECIAL FUNCTION
DUPLEX SCAN
3
Press the [OK] key.
BACK
OK
GHI
The key operator code
entry screen will appear.
4
Use the numeric keys to enter the key
operator code.
OK
ABC
DEF
GHI
JKL
MNO
PQRS
TUV
WXYZ
@.- _
FUNCTION
ACC. #-C
READ-END
• " " will appear for each digit entered.
• The mode selection screen will appear.
5
Select the desired mode with the [ ]
or [ ] key.
SPECIAL FUNCTION
PAPER SIZE SET
DISPLAY CONTRAST
TOTAL COUNT
KEY OPERATOR PRG.
Enter key operator
code.
KEY OPERATOR CODE:
-----
MODE SELECT
KEY OP. # CHANGE
COPIER
PRINTER
SCANNER
MODE SELECT
KEY OP. # CHANGE
COPIER
PRINTER
SCANNER
6
Press the [OK] key.
OK
The settings of the
selected mode will
appear.
Example: The above screen shows the settings when
printer mode is selected.
7
Select the desired program with the
[ ] or [ ] key.
• A checkbox appears to the left of several of the
programs. To enable a function (make a checkmark
appear), press the [OK] key. To cancel a selection,
press the [OK] key once again to remove the
checkmark and disable the function. Go to step 9.
• When the [OK] key is pressed for a program that
does not have a checkbox, the settings for the
program appear.
8
Press the [OK] key and follow the
instructions in the program screen.
OK
9
To use another program for the same
mode, select the desired program with
the [ ] or [ ] key.
To use a program for a different mode, press the
[BACK] key and select the desired mode. To exit
the key operator programs, press the [CA] key
(
).
PRINTER
NOTICE PAGE
FORCED OUTPUT OF
PRINT
27
4