Sharp BP-20C20 빠른 시작 매뉴얼 - 페이지 17
{카테고리_이름} Sharp BP-20C20에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp BP-20C20 38 페이지. Digital full colour multifunctional system
페이지 인쇄
LOADING PAPER
NAMES AND LOCATIONS OF TRAYS
The names of the trays are as follows.
(2)
(3)
Setting orientation of the print side
The setting orientation varies for the print side of paper, depending on the tray used. For "Letter Head" and
"Pre-Printed", set the paper in the reverse orientation.
Place with the print side facing the direction indicated below.
Tray
Trays 1 - 4
Bypass tray
LOAD PAPER INTO THE TRAY 1
1
2
A
BEFORE USING THE MACHINE
(1)
(2)
(3)
(4)
(1)
(5)
(4)
(5)
In normal status
Facing up
Facing down
Pull out the paper tray.
Gently pull the tray out until it stops.
Push the centre of the pressure plate down until it locks into
place.
Adjust guide plates A and B to match
B
the longitudinal and transversal
dimensions of the paper to be loaded.
The guide plates A and B are slidable. Squeeze the
separator plate lever and slide to the desired paper size.
Bypass tray
Tray 1
Tray 2 (when a 500-sheet paper feed tray is installed)
Tray 3 (when a stand/2x500 sheet paper drawer is
installed)
Tray 4 (when a stand/2x500 sheet paper drawer is
installed)
With letter head or pre-printed paper set
Facing down
Facing up
17