Sharp BP-20C20 빠른 시작 매뉴얼 - 페이지 18

{카테고리_이름} Sharp BP-20C20에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp BP-20C20 38 페이지. Digital full colour multifunctional system

BEFORE USING THE MACHINE

• To load 11" x 17" paper

Remove the divider plate. Move the divider plate all the way over to the paper feed opening side (right side), and pull

up to remove. Insert the removed divider plate into A.

• The stack must not be higher than the indicator line.

• Do not add paper.

Insert the paper into the tray.

• Load the paper with the print side facing up. Make sure

the stack of paper is straight before loading it.

• Place the paper under the roller on the right side of the

tray.

Roller

• Fan the paper well before loading it. If the paper is not

fanned, multiple sheets may feed at once and cause a

misfeed.

• After loading the paper, close the guides to the paper

width not to leave the gap from the guides A and B.

• Do not load the paper as shown below.

Gently push the paper tray into the

machine.

Push the tray firmly all the way into the machine slowly.

Forcefully inserting the paper may cause skewed feeding

and paper misfeeds.