Sharp MX-2300N Guide 문서 제출 매뉴얼 - 페이지 13

{카테고리_이름} Sharp MX-2300N Guide에 대한 문서 제출 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp MX-2300N Guide 47 페이지. Sharp mx-2700n, mx-2300n mfp - scan to e-mail instructions
Sharp MX-2300N Guide에 대해서도 마찬가지입니다: 사양 (2 페이지), 문제 해결 매뉴얼 (44 페이지), 안전 매뉴얼 (28 페이지), 스캔하여 이메일 지침 (7 페이지), 소프트웨어 설정 매뉴얼 (48 페이지)

페이지 인쇄
Sharp MX-2300N Guide 문서 제출 매뉴얼
4
To cancel scanning...
Press the [STOP] key (
• When a file is stored using Quick File, the following user name and file name are automatically assigned to the file.
User Name: User Unknown
File Name: Mode_Day-Month-Year_Hour-Minute-Second
(Example: Copy_01082005_134050)
Stored to: Quick File Folder
• When user authentication is used, the user name that was used for login is automatically selected.
• Only the file name and location of a file stored in the Quick File Folder can be changed.
To cancel Quick File...
Touch the [Quick File] key in the screen of step 2.
or
).
Select copy settings and then press the
[COLOUR START] key (
[BLACK & WHITE START] key (
• When copying begins, the scanned document image is
saved to the hard drive.
The selected copy settings are also saved.
• To prevent accidental saving of the document, "The scanned
data is stored in the quick file folder." appears as a message
for 6 seconds after the [START] key is pressed.
The 6-second message display time can be changed using
"Message Time Setting" in the system settings
(administrator).
• If you inserted the original pages in the document feeder
tray, all pages are scanned.
• If you placed the original on the document glass, scan each
page one page at a time.
When scanning of one page finishes, replace it with the next
page and press the [START] key.
Repeat until all pages have been scanned and then press
the [Read-End] key.
12
) or the
).