Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector 기본 정보 및 준비 사항 - 페이지 4
{카테고리_이름} Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector에 대한 기본 정보 및 준비 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector 10 페이지. Colour inkjet printer
Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector에 대해서도 마찬가지입니다: 운영 매뉴얼 (49 페이지), 운영 매뉴얼 (49 페이지), 운영 매뉴얼 (47 페이지)
페이지 인쇄
Preparing the Remote Control
Inserting the batteries
1 Press firmly and slide the battery
cover off.
2 Insert the two supplied batteries
(size AAA/R03). Ensure that the
polarities (+ and –) of the
batteries are aligned correctly.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• If you will not be using the remote control for a long time, remove the batteries.
• Do not mix new and old or different types of batteries.
• There are operations that can only be carried out by remote control. Handle the remote control carefully.
Remote control effective range
The remote control sensors are located on the front and back of the unit.
The controllable range is 50 degrees horizontally and 30 degrees vertically relative to a line that is at a right angle to the
remote control sensor. The working distance between the remote control and the unit's remote control sensor is limited to 4
meters (157
1
⁄
˝ ).
2
Battery cover
3 Slide the battery cover back
until it snaps into place.
50˚
30˚
50˚
30˚
Battery cover
9