Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector Основна інформація та підготовка - Сторінка 4
Переглянути онлайн або завантажити pdf Основна інформація та підготовка для Проектор Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector. Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector 10 сторінок. Colour inkjet printer
Також для Sharp AJ-1800 - Notevision PG-M10X XGA DLP Projector: Посібник з експлуатації (49 сторінок), Посібник з експлуатації (49 сторінок), Посібник з експлуатації (47 сторінок)
Друкувати сторінку
Preparing the Remote Control
Inserting the batteries
1 Press firmly and slide the battery
cover off.
2 Insert the two supplied batteries
(size AAA/R03). Ensure that the
polarities (+ and –) of the
batteries are aligned correctly.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• If you will not be using the remote control for a long time, remove the batteries.
• Do not mix new and old or different types of batteries.
• There are operations that can only be carried out by remote control. Handle the remote control carefully.
Remote control effective range
The remote control sensors are located on the front and back of the unit.
The controllable range is 50 degrees horizontally and 30 degrees vertically relative to a line that is at a right angle to the
remote control sensor. The working distance between the remote control and the unit's remote control sensor is limited to 4
meters (157
1
⁄
˝ ).
2
Battery cover
3 Slide the battery cover back
until it snaps into place.
50˚
30˚
50˚
30˚
Battery cover
9