Sharp Notevision PG-D40W3D 설정 매뉴얼 - 페이지 13

{카테고리_이름} Sharp Notevision PG-D40W3D에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Notevision PG-D40W3D 35 페이지. True xga/wxga data projectors
Sharp Notevision PG-D40W3D에 대해서도 마찬가지입니다: 사용자 설명서 (2 페이지), 사양 시트 (2 페이지), 사양 (2 페이지), 브로셔 및 사양 (2 페이지)

페이지 인쇄

Click "Internet Protocol Version 4

(TCP/IPv4)", and click the

"Properties" button.

Conﬁ rm or change an IP address

for the setup computer.

1 Conﬁ rm and note the current IP

address, Subnet mask and Default

gateway.

Make sure to note the current IP address,

Subnet mask and Default gateway as you

will be required to reset them later.

2 Set temporarily as follows:

IP address: 192.168.150.3

Subnet mask: 255.255.255.0

Default gateway: (Do not input any

values.)

Note

•

The factory default settings for the projector are

as follows:

DHCP Client: OFF

IP address: 192.168.150.2

Subnet mask: 255.255.255.0

Default gateway: 0.0.0.0

After setting, click the "OK"

button, and then restart the

computer.

After conﬁ rming or setting, proceed to "3. Setting up Network Connection for the Projector".

Setting up the Projector Network Environment

-13